Releasing the key container – GE eKEY User Manual
Page 43
Chapter 3
KeyBoxes
35
If you access both types of KeyBoxes, the PDA does not need to
be inside the shell to access iBoxes. If your area uses iBoxes
exclusively, an eKEY shell is not required.
Releasing the key container
To access the listing keys inside a KeyBox, do the following:
Note:
Your eKEY must be updated to access KeyBoxes.
See Chapter 2
.
1. Open the eKEY application. If you are accessing an AEII
KeyBox, place your PDA inside the eKEY shell and
close the cover. Press the On button on the shell to start
the eKEY application. The eKEY menu displays
differently when the PDA is inside the shell but the
options are the same (Figure 16).
Figure 16. eKEY menu display inside and outside shell
2. Select OBTAIN KEY from the eKEY menu.
3. Enter your PIN code and select OK. If your PDA is
inside the eKEY shell, press Enter on the shell.
Inside shell
Outside shell