Garmin nuvi 650 - Manual (Page 2)

WARNING: See the Important Safety and Product Information guide in the product box
for product warnings and other important information.
Check your state and local traffic laws before mounting. Currently, state laws in California
and Minnesota prohibit drivers from using suction mounts on their windshields while
operating motor vehicles. Other Garmin dashboard or friction mounting options should be
used. See the Important Safety and Product Information guide for more details.
Mounting Your nüvi
1. Plug the vehicle power cable into the power connector on
the back of the cradle.
2. Clean and dry your windshield and the suction cup with a
lint-free cloth. Place the suction cup on the windshield.
3. Flip the lever back, toward the windshield.
4. Flip up the GPS antenna. Fit the bottom of your nüvi into the
cradle.
5. Tilt the nüvi back until it snaps into place.
6. Plug the other end of the vehicle power cable into a power
outlet in your vehicle. Your unit should turn on automatically
if it is plugged in and your vehicle is running.
Ways to Charge Your nüvi
Connect the vehicle power cable, place the nüvi in the
cradle, and start your vehicle.
Connect the USB cable to the nüvi and your computer.
Connect the AC adapter (optional accessory) to the nüvi and a wall outlet.
•
•
•
➎
➍
Windshield
➋
➌
➊
suction cup
mount
cradle