Furuno FEA-2100 - Manual (Page 3)

3
5. Place the cursor on an alphabet or number button
and press the [SELECT] key. Repeat this to
enter catalogue name. Set a name which is easy
to understand.
For example, if the issue date of the CD is March
11, 2003, name it as JP20030311. You can
switch between lower case and upper case by
placing the cursor on the [Upper] or [Lower]
button and pressinh the [SELECT] key.
6. Place the cursor on the [OK] button and press the
[SELECT] key.
Note: If the catalogue name is the same as an
existing one you named previously, the
following message appears. To overwrite the
name, place the cursor on the [Yes] button and
press the [SELECT] key. To change the name,
place the cursor on the [No] button, press the
[SELECT] key and enter a new name.
7. Place the cursor on the [Close] button and press
the [SELCT] key to close the [Load or view CD
Catalogue] window.
[ ] button
[YES] button
[Load or View CD Catalogue] window
[Close] button