Meridian Audio 565 - Manual (Page 32)

Customising the digital surround processor
28
Changing the spaciousness of the sound
The Dolby Digital, Music, Trifield, and Ambisonic presets
allow you to vary these delays down to 0ms.
You can adjust the spaciousness of the sound by altering the
delay on the rear and side channels.
Note that these adjustments are not available for the Direct,
Stereo, Mono, or Academy presets.
To change the relative delay of the
rear or side speakers
● Press > or < until the display shows the speaker(s) you want
to adjust.
For example:
R Delay 15
● Press A or V to change the relative delay of the speakers.
You can change the rear delay between 15ms, which is
equivalent to moving the rear speakers 15 feet away, and 30ms,
which is equivalent to moving the rear speakers 30 feet away.
If you have side speakers an additional S Delay option allows
you to adjust the delay on the side speakers between 15ms and
30ms. Note that for best results you should never set the
S Delay to be less than the R Delay.