Furuno PG-1000 - Manual (Page 3)

iiiiiiiiiiiii
i
SAFETY INSTRUCTIONS
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or equipment damage.
Use the supplied power cable.
Use of a wrong power cable can cause
fire or equipment damage.
CAUTION
Maintain the compass safe distance.
Standard compass Steering compass
0.5 m 0.4 m
Turn off the power at the mains
switchboard before beginning the
installation.
Post a sign near the switch to indicate
it should not be turned on while the
equipment is being installed.
Fire or electrical shock can result if the
power is left on or is applied while the
equipment is being installed.
WARNING
Safety Information for the Operator
CAUTION
Turns off the autopilot before selecting
output data format.
The autopilot may turn the rudder suddenly.
Turns off the autopilot before aligning
heading.
The autopilot may turn the rudder suddenly.
WARNING
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
Turn off the power immediately if water
leaks into the equipment or the
equipment is emitting smoke or fire.
Continued use of the equipment can cause
fire or electrical shock.
Do not place liquid-filled containers on
the top of the equipment.
Fire or electrical shock can result if a liquid
spills into the equipment.
Safety Information for the Installer