Franklin MWS-2018 - Manual (Page 5)

4
Warning: Never install or remove a
cartridge when BOOKMAN is on. If
you do, information that you entered
in its built-in book, and in an installed
cartridge, will be erased.
1. Turn BOOKMAN off.
2. Turn BOOKMAN over.
3. Align the tabs on the car-
tridge with the notches in
the slot.
4. Press the cartridge down
until it snaps into place.
Installing Cartridges
➤ Removing Cartridges
Warning: When you remove a
cartridge to install another, informa-
tion that you entered in the
removed cartridge will be erased.
Selecting Books
Once you have installed a cartridge in
your BOOKMAN, you must select
which book you want to use.
1. Turn BOOKMAN on.
2. Press
CARD
.
These are sample books.
3. Press or to highlight the
book you want to use.
4. Press
ENTER
to select it.
➤ Resuming Where You Left Off
You can turn off BOOKMAN at
any screen. When you turn
BOOKMAN on again, the screen
that you last viewed appears.