Replacing the battery – FUJITSU V700 User Manual
Page 59
54 - Lithium ion Battery
Replacing the Battery
With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not
charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps:
1
Have a charged battery ready to install.
2
Shut down your notebook and disconnect the AC adapter.
3
While pushing the battery bay release latches towards the battery pack, lift the battery out of the bay using the
latches to lift it.
4
Insert a new battery into the bay, and press it down so that the latches click into place.
5
Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
1
Plug an AC Adapter into the system and connect it to a power outlet.
B
E
SURE
TO
PLUG
IN
AN
AC A
DAPTER
PRIOR
TO
REMOVING
THE
BATTERY
. T
HERE
IS
NO
BRIDGE
BATTERY
PRESENT
TO
SUPPORT
THE
SYSTEM
WHILE
THE
BATTERY
IS
BEING
REPLACED
. I
F
YOU
DO
NOT
USE
AN
AC A
DAPTER
YOU
WILL
LOSE
ANY
UNSAVED
FILES
.