FUJITSU A6110 - Manual (Page 7)

7
Drive0 Submenu of the System Menu
The Drive0 submenu identifies what ATA devices are installed.
Figure 3. Drive0 Master Submenu
Table 3: Fields, Options and Defaults for the Drive0 Submenu of the System Menu
Menu Field Options Default Description
Type: ■ Auto
■ None
[Auto] Selects the hard drive device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Setup items do not appear.
LBA Format Logical Block Addressing (LBA)
Total Sectors: --- --- The total number of sectors on your hard disk
Maximum
Capacity: --- --- The maximum capacity of your hard disk
Phoenix TrustedCore(tm) Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive0 [FUJITSU MHW2120BH]
Type: [Auto] ]
LBA Format
Total Sectors: 234441648
Maximum Capacity: 120GB SATA1
▲
Info System Advanced Security Boot Exit
S y s t e m M e n u