FUJITSU DL3750+/3850+ User Manual
Page 111
Setup Mode
USING SETUP MODE
User's Manual
5-33
Quick
Reference
Introduc-
tion
Setting Up
Paper
Handling
Printing
Setup Mode
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Options
Description
Items
150
The baud rate is in bps (bits per
300
second). Select the same baud rate as
600
used by your computer or modem.
1200
2400
4800
9600
19200
Indicates data transmission protocol.
XON/XOF
The DC1 and DC3 codes are used.
DTR
The Data Terminal Ready signal is used.
REV-CHL
The Reverse Channel signal is used.
IGNORE
DSR is ignored by the printer.
DETECT
DSR is detected by the printer.
FULL
Simultaneous data transmission occurs in
opposite directions.
HALF
Data transmission occurs in either
direction, but not simultaneously.
IGNORE
CTS is ignored by the printer.
DETECT
CTS is detected by the printer.
IGNORE
CD is ignored by the printer.
DETECT
CD is detected by the printer.
<==END==>
Indicates the end of the HARDWRE
item list. Press the MENU button to print the
first item, which is
TEAR OFF button to print the previous item.
Press the ONLINE button to reprint the
<