Furuno MODEL CSH-73 - Manual (Page 16)

1-8
Remote Control Box
1 2 3
DISP SELECT
DATA
d c d
EVENT TGT LOCK
ESTIMATE
1
NET COURSE
FISH
OFF-
CENT
TX
1 2 3 4
FUNCTION
5
–
+
RANGE
+
–
GAIN
SHOOT MEMO
RECALL
AUTO
AUTO
VERT SCAN
TILT TRAIN
SCAN DEPTH
Each press displays water
temperature or depth at screen
center for about five seconds.
Turns on transmitter. Press this
key for more than one second for
stable operation.
Shifts trackball mark.
1-3: Same as 1-3 on main panel.
4-5: Same as - and + on main pane
Displays net shooting mark.
Saves picture to memory card.
Not used.
Replays a stored picture.
Varies the tilt angle of the
sounding beam between 0¡
and 90¡.
Automatically tillts sounding
beam in 2¡ steps within sector
selected by WIDTH key.
Not used.
Adjust receiver sensivity.
Selects display range.
Press to enter mark
shown on key or shift
screen center.
aises/lowers the transducer.
: Raises transducer.
Mid protrusion
: Full protrusion
Selects which display unit to
ontrol in multiple display unit
nstallation.
Trains the transducer
automatically within a
selected sector.
ets direction of the sounding
eam center between 165ß port
nd 165ß starboard.
TGT
SLICE
Figure 1-5 Remote control box