Franklin French Professor/ Professeur d'Anglais BQF-2025 - Manual (Page 18)

17
Resetting BOOKMAN
If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press
CLEAR
and then press
ON/OFF
twice. If nothing happens, follow
the steps below to reset it.
Warning: Pressing the reset button with
more than very light pressure may perma-
nently disable your BOOKMAN. In addi-
tion, resetting BOOKMAN erases settings
and information entered into its built-in
book, and in an installed book card.
1. Hold
CLEAR
and press
ON/OFF
.
If nothing happens, try Step 2.
2. Use a paper clip to gently press
BOOKMAN’s reset button.
The reset button is recessed in a pin-
sized hole on the back of BOOKMAN.
Look for it on the battery cover or near
the book card slot.
➤ Troubleshooting BOOKMAN
• Make sure your book card, if any,
is installed correctly.
• Check that the book card’s metal
contacts are dirt-and dust-free.

Optional Features
AC adaptor jack: Your BOOKMAN
may be equipped with a standard 3.5 mm
jack for use with a 9-volt, 200-300 milli-
amp AC/DC adaptor.
This symbol indicates that the inner core
of the plug of an AC adaptor is negative
and that the outer part of the plug is posi-
tive. If your AC/DC adaptor does not
have this symbol, confirm its compatibil-
ity at its place of purchase.
Headphone jack: Your BOOKMAN
may also have a 3.5 mm stereo head-
phone jack for use with a standard im-
pedance 8 Ohm headset.
Headphone
jack
AC adaptor
jack