FUJITSU A3110 - Manual (Page 8)

8
L i f e B o o k A S e r i e s B I O S
Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary ATA devices.
Figure 3. Drive1 Submenu
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field Options Default Description
The fields that appear on this screen are for display only, and reflect the default settings for the Drive1 device.
Device --- Hard Disk Displays the type of Drive1 ATA/IDE drive.
Vendor --- (Device Name) Displays the maker of the Drive1 device.
LBA Mode --- Supported Displays whether Logical Block Addressing is supported by the
device.
PIO Mode --- 4 Displays the method for moving data to/from the Drive1
device.
Async DMA --- Multiword DMA-2 Displays the Multiword DMA method for moving data to/from
the Drive1 device.
Ultra DMA --- Ultra DMA-5 Displays the Ultra DMA method for moving data to/from the
Drive1 device.
BIOS Setup Utility
Main Advanced Security Boot Info Exit
F1: Help Esc: Exit
v v v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Drive1:
Device :ATAPI CDROM
Vendor :_NEC DVD_RW ND-7550A
LBA Mode :Supported
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-2
Type [Auto]