Yamaha CDX-397MK2 - Manual (Page 21)

English
19
En
Notes
● Because programmed data changes every time RANDOM is
pressed, the unrecorded space at the end of each side of the
tape also varies accordingly.
● All tracks may not be programmed if the tape length is not
enough. To program all tracks, use a tape that is longer than the
actual playing time.
● In step 2, you can check the program data for side A and side
B. Information for each side is displayed for 3 seconds.
1
Shows the number of programmed tracks.
2 Shows the total time of programmed tracks.
3 Shows the side of the tape.
● Up to 40 tracks can be programmed. A pause inserted between
side A and B is counted as one track.
● CD synchronized recording function can be used if your tape
deck is compatible with it. If so, in step 3 and 4, press
SYNCHRO and then press
on the remote control of this
unit. Recording automatically starts. (For details, refer to page
21.)
Random sequential tape-programming (for Audio CD)
1
Follow steps 1 – 3 on page 16.
2
Press RANDOM.
* The unit automatically programs tracks at random for
both side A and side B considering the total time of the
tape.
3
Start recording on the tape deck, and then press
on the remote control of this unit.
4
This unit automatically pauses at the end of the side
A. Turn the tape over to the side B, resume
recording on the tape deck, and then press
or
on the remote control of this unit to start
playback.
SEARCH
TIME/INFO
FOLDER
SYNCHRO TAPE PEAK SPACE
REPEAT
DIMMER RANDOM
A–B PROGRAM CLEAR
3, 4
4
2
RANDOM
PROG. RANDOM
3 2 1
The unit automatically programs tracks in random sequential order for recording to tape.
01En_02_BOD_CDX-397MK2_G.p65 1/23/07, 13:41 19