Fujitsu Siemens Computers 19P2 - Manual (Page 24)

Colour monitor 19P2
16 - English A26361-K713-Z100-1-5E19
Setting advanced options
Calling the Advanced setting window
Degaussing the monitor ( Degauss )
When colour shifts occur in the screen display due to the influence of magnetic
fields (e. g. after transporting or turning the screen), the screen must be
degaussed.
Do not use the feature more than once within a 30-minute period.
Activating the factory settings ( Recall )
Factory settings are available for picture position, picture size and picture geometry
in the preset operating modes (see table in the chapter "
Preset operating modes ".
YES = The factory settings are activated.
NO = The user-defined settings are retained.
Setting the video signal ( Video Input Level )
If required, the entry level of the video signal can be changed from 0.7 V (default)
to 1 V. If the monitor is operated on a PC, use the default setting of 0.7 V.
Setting the OSD menu and displaying monitor information
Calling the Menu setting window
Hz
Display information on the current and available modes ( Display Timing )
$ # = Display default ( Factory Timing ) and user modes ( User Timing )
Setting menu position ( Position )
This function allows you to move the menu window on the screen.
Setting menu duration ( Duration )
With this function you can set how long the OSD menu is to be displayed each
time (3, 7, 10, 20 or 50 seconds).
Selecting the menu language ( Languages )
The OSD menu is available in nine languages (default setting: English).
Setting colour for the OSD menu ( Menu Color )
Menu Color 1 = Background colour is blue
Menu Color 2 = Background colour is green