Furuno FAX-408 User Manual
Page 27
17
1. Open the paper cutter by loosening its two
screws. Detach it together with the paper
compartment cover. Put the paper feed lever
in the downward position. See Figure 1.
2. While pushing the paper guide (2) in the
direction indicated, remove the remaining roll
paper. See Figure 2.
3. Pass the recording paper between the
paper-end detector lever and rubber roller.
Hold the edge of the paper which is above
the roller and pull upward. See Figure 3.
(1)
(2)
Paper guide
Figure 1
Figure 2
Figure 3