Friedrich ZStar - Manual (Page 7)

ENGLISH
5
How to operate your Friedrich ZStar ®
Hi
Fan
Lo
Fan
Hi
Cool
Off
Lo
Cool
Temperature
Mode
Warmer Cooler
O
O
Function Controls
When the air conditioner has finished cooling the room and is turned off or set to the fan
position, wait at least 3 minutes before resetting to the cooling operation again.
FUNCTION CONTROL
This dial allows you to select 2 cooling and 2 fan speeds.
Turn to Off to turn everything off.
Turn to Hi Cool for quick cooling.
Turn to Lo Cool to maintain a desired temperature.
The Hi Fan setting provides maximum circulation of filtered room air
without cooling.
The Lo Fan setting is a slow fan speed without cooling.
TEMPERATURE CONTROL
This dial is the thermostat. Turn it clockwise for cooler and
counterclockwise for
warmer temperature.
• FOR NORMAL COOLING
1. Turn the Mode switch to the Hi Cool or the Lo Cool setting.
2. Set the Temperature control to the desired temperature point (the mid-point is a good
starting position). If the room temperature is not satisfactory after a reasonable time, adjust the
control to a cooler or warmer setting, as appropriate.
• FOR MAXIMUM COOLING
1. Turn the Mode switch to the Hi Cool setting.
2. Set the temperature control to the coolest temperature point (all the way to the right).
• FOR QUIETER OPERATION
1. Turn the Mode switch to the Lo Cool setting.
2. Set the Temperature control as needed.
CAUTION