beautypg.com

Part a: general – FIAT Uno 45 User Manual

Page 185

background image

9

Fuel and exhaust systems

Warning: Many of the
procedures in this Section
require the removal of fuel lines
and connections that may result

in some fuel spillage. Before carrying out
any operation on the fuel system refer to
the precautions given in ‘Safety first!’ at
the beginning of this Manual and follow
them implicitly. Petrol is a highly
dangerous and volatile liquid, and the
precautions necessary when handling it
cannot be overstressed.

Caution: On fuel injection
models, the system is
pressurised, therefore extra
care must be taken when

disconnecting fuel lines. When
disconnecting a fuel line union, loosen the
union slowly, to avoid a sudden release of
pressure that may cause fuel to spray out
and have a container and cloth ready to
catch spillages. Fuel pressure checking
must be entrusted to a Fiat dealer, or other
specialist, who has the necessary special
equipment.

PART A: GENERAL

Unleaded fuel

Note: On models with catalytic converters

only unleaded petrol must be used - the use
of leaded petrol will destroy the catalyst.
1 It is possible to use unleaded fuel (minimum
95 RON) in the following models with the
indicated serial numbers.

Engine

Serial number

903 cc

146A.000
146A.046
146A.048

999 cc

156A2.00

1108 cc

160A3.000

1116 cc

138B.000
138B.046
146A4000
146A4.048

1299/1301 cc

138B2.000
138B2.046
149A7.000
1149A7.000
146A2.000

1372 cc

146C1.000
146A8.000
160A1.046

2 On all except the 903 cc engine, the use of
unleaded fuel is conditional upon the
avoidance of constant high speeds and
sudden acceleration.

Air cleaner - modified types

3 The air cleaner on later models is of the
automatic temperature controlled type. The
need to move the intake control lever to winter
or summer positions is no longer required.
4 The air cleaner on the 999 cc engine is of

rectangular shape and the element is
removed for renewal after prising back the
toggle type clips (photos).
5 To remove this type of air cleaner,
disconnect the cold and hot air intake hoses
and the large and small breather hoses
(photos).
6 Unscrew the nut from the upper casing
section and then release the lower toggle type
clip and lift the air cleaner from the carburettor
(photo). Note the sealing ring between the air
cleaner and the carburettor. Unless the ring is
in good condition, renew it.
7 If the thermostatically-controlled cold air
flap opener in the air cleaner casing is faulty
(checked by holding a mirror against the cold
air intake when the engine is warm), renew the
opener (single fixing screw); no repair is
possible (photo).

13•60 Supplement: Revisions and information on later models

9A.7 Air cleaner thermostatic flap opener

on the 999 cc model

9A.6 Air cleaner casing nut on the 999 cc

model

9A.5C Air cleaner breather hoses on the

999 cc model

9A.5B Air cleaner cold air intake on the

999 cc model

9A.5A Air cleaner hot air intake and lower

retaining clip on the 999 cc model

9A.4B Air cleaner element on the 999 cc

model

9A.4A Air cleaner toggle clip on the 999 cc

model

This manual is related to the following products: