FUJITSU Primergy ServerView Suite ServerView Remote Management Frontend V4.90 - Manual (Page 43)

ServerView Remote Management Frontend 43
Working with the Remote Management Frontend Connection to server
Requirements at a managed server with RSB S2 /RSB S2 LP (3 HU)
– The framework vehicle of the RSB S2/ RSB S2 LP (3HU) must be 6.4.57.29
or higher.
– Access via Telnet must be activated via RSB S2/ RSB S2 LP (3HU).
I
Since the Operations Manager does not know the management port
value, the Remote Management Frontend works with the default
value.
Since a connection is not automatically established when the Remote
Management Frontend is started, you can correct any nonstandard
value for the management port after the Remote Management
Frontend has been started.
I
Maximum number of parallel Telnet sessions for a connection via an RSB
S2/ RSB S2 LP (3 HU) (with firmware version 7.0 or higher): maximum 4