FUJITSU PRIMERGY BX600 - Manual (Page 194)

Management Commands Command Reference
Intelligent Blade Panel Module
193
Default Setting
Enabled
Command Mode
Global Config
This command enables Link Up/Down traps for the entire IBP. When enabled, link traps are
sent only if the Link Trap flag setting associated with the port is enabled (see ‘snmp trap
link-status’ command).
Syntax
snmp-server enable traps linkmode
no snmp-server enable traps linkmode
no - This command disables Link Up/Down traps for the entire IBP.
Default Setting
Enabled
Command Mode
Global Config
This command enables Multiple User traps. When the traps are enabled, a Multiple User Trap
is sent when a user logs in to the terminal interface (EIA 232 or telnet) and there is an existing
terminal interface session.
Syntax
snmp-server enable traps multiusers
no snmp-server enable traps multiusers
no -
This command disables Multiple User trap.
Default Setting