Franklin HW-1216 - Manual (Page 4)

Before you start, you should install new batteries and
adjust the screen contrast. Note: Replace the batteries
when the screen contrast is too light even after
adjustment. When you remove batteries, stored
information is erased. Please have a small screwdriver
at hand before you follow the steps below.
1. Turn the unit off and turn it over.
2. Unscrew the back cover and slide it off in the
indicated direction.
3. Install four AAA batteries.
4. Replace the back cover and screw.
5. Press ON/OFF.
The first time you turn on this dictionary, you are
asked to enter your name.
6. Type your name as you want it to appear in
this dictionary. Or press ENTER if you do not
want your name to appear.
To type a space, press
. The first letter of each word
you type in your name will automatically appear as
a capital.
7. Press ENTER.
8. Press
or repeatedly to make the screen
lighter or darker.
Note: You can make the screen lighter or darker
only when Enter a word is on the screen.
3
Getting Started
RETAIN FOR FUTURE REFERENCE: Use batteries
only of the same or equivalent type, inserted with the
correct polarity, as recommended in this manual.
Exhausted batteries should be removed. Do not mix
old and new batteries or batteries of different types. In
addition, the supply terminals should not be shorted.