Fitness Quest 386da - Manual (Page 5)

5
FIGURE 1
NOTE: There are two FOOT TUBES. The REAR
FOOT TUBE has FOOT CAPS (6) on
each end and the FRONT FOOT TUBE
has WHEELS (7).
Step 1. Remove the two M8 x 1.25 x 60
CARRIAGE BOLTS (1), M8 WASHERS
(4) and M8 x 1.25 CAP NUTS (5) from
the REAR FOOT TUBE (2) with FOOT
CAPS (6).
Step 2. Attach FOOT TUBE (2) to rear of
FRAME (3) with hardware removed in
Step 1. Make sure to insert BOLTS
through "square holes" first.
IMPORTANT
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.
ASSEMBLY
FIGURE 2
FIGURE 2
Step 3. Remove the two M8 x 1.25 x 60
CARRIAGE BOLTS (1), M8 WASH-
ERS (4) and M8 x 1.25 CAP NUTS
(5) from the FRONT FOOT TUBE (2).
Step 4. Attach FOOT TUBE (2) to front of
FRAME (3) with hardware removed
in Step 3. Make sure to insert BOLTS
through "square holes" first.
2
REAR
FOOT
TUBE
6
FOOT
CAP
1
M8 x 1.25 x 60
CARRIAGE BOLT
6
FOOT
CAP
3
FRAME
5
M8 x 1.25
CAP
NUT
FIGURE 1
3
FRAME
4
M8
WASHER
2
FRONT
FOOT
TUBE
5
M8 x 1.25
CAP
NUT
1
M8 x 1.25 x 60
CARRIAGE BOLT
7
WHEEL
7
WHEEL
4
M8
WASHER
Occasionally our products contain components that are pre-lubricated at the factory. We recommend that
you protect flooring, or anything else the parts may contact, with newspaper or cloth.