Fujitsu Siemens Computers BX600 - Manual (Page 15)

Installation Tiering a BX600 Digital KVM Switch from a KVMs3-1621
9 590-673-501A
Connect the other end of the CAT5 cable to a KVM Intelligent Adaptor (KVM-IA).
Connect the local KVM cable to the local KVM port of the BX600 Digital KVM
Switch and then to the KVM-IA.
Once the BX600 Digital KVM Switch is connected, the server blades appear in
OSCAR.
Figure 7: Tiering a BX600 Digital KVM Switch from an s3-1621 Console Switch
Once connected, the s3-1621 Console Switch will automatically configure the slots in
the KVM menu. When the local system is set up, you will need to resynchronize the
server list in the s3-1621 Console Switch software in order to see the list of BX600 blade
chassis server blades. See your s3-1621 Console Switch documentation.
NOTE: With the KVMs3-1621 cascaded above the BX600 Digital KVM switch, you cannot attach virtual media via
the KVMs3-1621 to the BX600 server blades.
Local KVM Cable
s3-1621 Console Switch
BX600 Blade Chassis
ARI Port
KVM Port
PS/2 Dongle/IA
Server Interface