Model x-12 owner's manual – Fostex X-12 User Manual

Page 14

Model X-12 Owner's Manual

The following table indicates the switch and knob settings used for overdubbing to
Tracks 3 and 4. Refer to this table and to the steps described on the previous page
to overdub the keyboard to Track 3 and vocal to Track 4.

When you are monitoring the recording sound and playback sound simultaneously,
refer to the table below for the relationship between the position of the

[PAN]

knob

and the sound balance.
Adjust the balance according to your needs. The recording sound will be always
positioned in the center.

Sound source

Playback [PAN] knob

Plug the mic into the
[INPUT] jack.

Adjust the playback sound
for comfortable monitoring
( R e f e r t o < U s i n g t h e
Playback [PAN] knob>
below).

Overdubbing the

keyboard to

Track 3

Overdubbing the

Vocal to Track 4

Plug the keyboard
o u t p u t t o t h e
[INPUT] jack.

[REC TRACK]

selector

Select track 4
for recording.

Select track 3
for recording.

Adjust playback levels of
tracks 1 and 2 with playback
faders 1 and 2.

Adjust playback levels in
tracks 1 - 3 with playback
level faders 1, 2 and 3.

Playback level fader

[LINE-MIC] knob

Adjust to optimum
level by CCW rotation
(LINE) of the knob.

Adjust to optimum
level by rotating the
knob CW (MIC).

[PAN] position

Monitoring sound position

Center

Both playback sound and recording sound will be
centered.

Hard "R"

The playback sound will be positioned on the right
and the recording sound will be centered.

Hard "L"

The playback sound will be positioned on the left
and the recording sound will be centered.

PAN