Fisher FVH-E420 User Manual
Page 33
PROGRAM TIMER RECORDING
Using Timer Recording for Several
Programs
If two or more programmed recording times overlap on
the same day, the VCR will not begin recording a new
program until the previous program has ended (as shown
below).
Program Recording Order
TIMER SETTING NOTES:
œ
If the programmed recording falls on a Saturday or a
Sunday, the Daily recording mode will not be possible.
œ
To select the A/V recording mode, press the INPUT
button instead of selecting a channel number.
œ
12:00 PM = noon; 12:00 AM = midnight.
œ
If the end of the tape is reached during timer recording,
the VCR stops and the power turns off automatically.
œ
If the power fails or the VCR is unplugged from the
AC outlet, the correct clock time and timer settings
are kept in memory for approximately 5 seconds.
After 5 seconds, the clock and program timer must
be reset when power is restored. Refer to INITIAL
SETUP to set the VCR.
Program
7:00PM
These portions will
not be recorded
10:00PM
8:00PM
9:00PM
SC4/UF (FVH-E420 GB) Wed. Jan. 26/2000
32