FUJITSU T4010D - Manual (Page 8)

8
L i f e B o o k T S e r i e s T a b l e t P C
Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal CD-ROM drive. The drive type is displayed on this menu as well as
the Main menu. Your notebook auto-senses the characteristics of the internal CD-ROM Drive installed. You will not
need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.
Figure 3. Secondary Master Submenu
Menu Field Options Default Description
Type: • Auto
• None
• CD-ROM
• Hard Disk [Auto] Selects the ATA/ATAPI device type. Select Auto to have the
type automatically identified by the BIOS at POST. If None is
selected, all of the following Set-up items do not appear.
Select CD-ROM or Hard Disk for appropriate drive type
installed at this connection.
Multi-Sector
Transfers: • Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors [Disabled] This option cannot be changed when Auto is selected. Spec-
ify the number of sectors per block for multiple sector trans-
fer.
LBA Mode
Control: • Disabled
• Enabled [Disabled] Enables or disables Logical Block Addressing in place of Cyl-
inder, Head, Sector addressing. This option cannot be
changed when Auto is selected.
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Secondary Master [TOSHIBA DVD-ROM SD-R2512-(SM)]
Type: [ Auto ]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
Transfer Mode: [Standard]
Ultra DMA Mode: [Disabled]
▲