Furuno 1623 - Manual (Page 38)

MN-1
MENU TREE
MENU/ESC
key
+
POWER/BRILL
key
SIMULATION ( OFF , ON, HIGH)
TEST (Tests display unit.)
LCD PATTERN (Displays test pattern.)
MEMORY CLEAR (Restores default menu settings.)
NMEA PORT (
IN/OUT, IN/IN)
NMEA OUTPUT ( OFF , ON)
GPS WAAS ( OFF , WAAS 00-27)
GO TO RADAR SETUP RADAR SETUP HEADING ADJUST (Adjusts heading.)
TIMING ADJUST (Adjusts timing.)
SET ON TIME (Displays total hours
radar has been powered.)
SET TX TIME (Displays total hours
of transmission.)
MENU/ESC
key
TX/ST-BY (TX, ST-BY )
INT REJECTION (OFF, LOW , MEDIUM, HIGH)
ECHO STRETCH ( OFF , LOW, HIGH)
FTC ( OFF , ON)
NOISE REJECTION (OFF, LOW , HIGH)
WATCHMAN TIME ( OFF , 5, 10, 20 min)
HDG LINE OFF (Temporarily turns off heading line.)
ECHO TRAIL (
OFF , 30 s; 1, 3, 6 min, CONTIN.)
TRAIL BRILLIANCE ( LOW , HIGH)
SYSTEM MENU
LANGUAGE ( ENGLISH , JAPANESE, Others)
RANGE UNIT ( nm , km, sm)
DEPTH UNIT ( m , ft, fa, HR, pb)
SPEED UNIT ( kt , km/h, mph)
WIND UNIT ( kt , km/h, mph, m/s)
TEMP UNIT (
°
C,
°
F )
NAV DATA (OFF, , , )
KEY BEEP (OFF,
ON )
RINGS (OFF, ON )
WAYPOINT MARK (OFF, ON )
PANEL DIMMER (OFF, LOW, MEDIUM, HIGH )
HUE ( DAY , NIGHT)
TRIPLOG RESET?
EBL REFERENCE (TRUE,
RELATIVE )
BEARING READOUT (TRUE, MAGNETIC )
CURSOR POSITION (LAT/LON, RNG&BRG )
TRIP SOURCE ( LAT/LON , SPEED)
WIND SPD/DIR (TRUE, APPARENT )
SHIFT MODE ( MANUAL , AUTO)
AUTO SHIFT SPEED (1-99 (kts), 15 )
TX SECTOR BLANK ( OFF , ON)
BLANKING START (000-359
°
, 000
°
)
BLANKING AREA (000-135
°
, 000
°
)
LOCAL TIME SETUP (-13:30 - +13:30, 0:00 )
ANTENNA SPEED (24rpm, AUTO )
RANGE
nm, sm:
0.125 , 0.25 , 0.5 , 0.75 , 1, 1.5 , 2, 3 , 4, 6 , 8, 12 , 16 )
km: 0.25 , 0.5 , 0.75 , 1, 1.5 , 2, 3 , 4, 6 , 8, 12 , 16, 24 )
SCANNER TEST (Tests antenna unit.)
Turn on power