Hayter Mowers 005C - Manual (Page 28)

PROBLEM POSSIBLE FAULT REMEDY
Engine vibrates excessively Mounting bolts loose Tighten bolts
Cutterblade bolt loose Tighten bolt
Cutterblades out of balance Replace cutterblades
Engine crankshaft bent Consult your dealer
Uneven cut Undulating ground conditions Change direction of travel
Cutterblades worn Renew cutterblades
Cutterblades out of balance Renew cutterblades
Wheels damaged Inspect and replace as necessary
Mower is hard to push Cut height too low Increase cut height
Wheels damaged Inspect and lubricate or replace
as necessary
1.28
TROUBLE SHOOTING
005155 (0) 28/2/05 10:34 am Page 1.28