Honeywell VISTA-128BP - Manual (Page 53)

– 53 –
Using Schedules (cont’d)
DAYS ? MTWTFSS
HIT 0-7 X X This is the prompt that actually activates the
temporary schedule, and allows the temporary
schedule to be customized to a particular week's
needs. To select the days which are to be
activated, enter the desired number 1-7 (Monday
= 1). An "X" will appear under that day,
indicating the previously entered schedule for
that day is active. Entering a day's number again
will deactivate that day. Pressing 0 will turn all
days on/off.
The temporary schedule will only be in effect for
the days which have the letter x underneath
them. As the week progresses, the days are reset
to the deactive state.
When completed, press * to exit the temporary
schedule entry mode.