Hand Held Products DOLPHIN 9500 - Manual (Page 66)

Terminal Setup
24. Click on
OK
.
25. Cold boot the terminal.
26. Click
Enter
.
27. Select the Specify an IP Address button.
28. Enter the IP Address, Subnet Mask, and Default Gateway.
29. Click on OK.
30. Go to Start, Programs , Cisco , and Client Utility.
31. Select
SSID
and its Value .
32. Click on OK.
33. Go to Start , Programs , Cisco , and Client Utili
34. Select World Mode , and change the Value to Disabled.
35. Click on OK.
36. Warm boot the terminal. To perform a warm boot, press and hold the
CTRL
and
SFT
keys for about 10 seconds, then release.
ty .
2-56 Supported Equipment Manual
• January, 2006