Husqvarna 15V2s AWD User Manual
Oper ator ′ s manual
Table of contents
Document Outline
- Contents
- Pre-delivery service
- After the first 8 hours
- Dear Customer,
- Driving and transport on public roads
- Towing
- Use
- Good service
- Serial Number
- Symbols
- Safety instructions
- Driving on slopes
- Children
- Maintenance
- Transport
- Presentation
- Throttle control
- Choke control
- Speed limiter
- Parking brake
- Cutting unit
- Lifting lever for the cutting unit
- Cutting height adjustment lever
- Lights
- Counter
- Seat
- Fuelling
- Release lever
- Before starting
- Start the engine
- Starting the engine with a weak battery
- Driving the Rider
- Cutting tips
- Stop the engine
- Maintenance schedule
- Cleaning
- Removing of the machine hoods
- Checking and adjusting the steering wires
- Adjusting the parking brake Rider 15V2
- Adjusting the parking brake Rider 15V2 AWD
- Checking and adjusting of throttle wire
- Checking and adjusting the choke wire
- Replacement of fuel filter
- Replacing the air filter
- Checking the fuel pump’s air filter
- Controlling the acid level in a dry- charged battery
- Ignition system
- Check the safety system
- Replacing the light bulbs
- Main fuse
- Checking the tyre pressure
- Checking the engine’s cooling air intake
- Fitting the cutting head
- Removing the cutting unit
- Checking and adjustment of the cutting unit’s ground pressure
- Checking the cutting unit’s parallelism
- Adjusting the parallelism of the cutting unit
- Replacing the cutting unit belts
- Service position for the cutting unit
- Checking the blades
- Removing the BioClip plug
- Checking the engine’s oil level.
- Changing the oil filter
- Checking the transmission oil level
- Lubricating the belt adjuster
- General lubrication
- Winter storage
- Guard
- Service
- EC-declaration of conformity (Applies to Europe only)