Typical specification, Cartridge globe valves, Cartridge globe valve actuators – Honeywell V5863A User Manual
Page 4
M6410A, M7410F ACTUATORS V5862A,V5863A VALVES
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
® U.S. Registered Trademark
© 2013 Honeywell International Inc.
63-1293—03 M.S. Rev. 02-13
Printed in United States
TYPICAL SPECIFICATION
Cartridge Globe Valves
Cartridge globe valve supplier must be Honeywell.
Valves shall be available in two- and three-way
mixing models with brass bodies and stainless
steel stem. Valves must have nominal rangeability
of 50:1 or better. Valves must have a leakage rating
less than 0.05% of the Cv.
Valves 1 in. or larger must be pressure balanced.
Valves shall be usable with hot water, chilled water,
or glycol solutions up to 50 percent. Valves must
have available insert replacement tools to facilitate
changing the cartridge.
Cartridge Globe Valve Actuators
Cartridge globe valve actuator supplier must be
Honeywell. Electric actuators shall provide either
floating or modulating control of two- and three-
way cartridge globe valves. Actuator will operate
at 24 Vac (+10/-30%) and 50/60 Hz. Actuator must
screw onto compatible valve body without the aid
of mounting tools. Actuators shall have an ambient
temperature rating of 32 to 122 degrees
Fahrenheit.