Husqvarna 225H60 - Manual (Page 10)

10
– English
Basic working techniques
• The hedge trimmer’s rear
handle can be set in three
positions by pulling out
the catch. See figure.
When the handle is
adjusted the hedge
trimmer should be idling
or not running.
• While working the
handle should always be
facing upwards irrespec-
tive of how the hedge
trimmer is directed.
• When trimming a hedge
the engine should always
be turned away from the
hedge.
• The hedge trimmer
should be held as close to
the body as possible to
get the best balance.
• Make sure that the tip
does not touch the
ground.
• Do not try to force the
work, but move at a
steady speed so that all
the stems are cut evenly.
Protective instructions when
work is completed
• The transport guard should always be fitted to the blades
when the machine is not in use.
• Ensure the blades have stopped and remove the spark plug
cable from the spark plug before carrying out cleaning,
repairs or an inspection.
• Always wear heavy duty
gloves when repairing the
blades. The blades are
extremely sharp and can
easily causes cuts.
• Store the machine out of
reach from children.
• Only use original spare
parts when carrying out
repairs.
SAFETY INSTRUCTIONS