Т³14, Tuning, Automatic search – haier L37A9-AKF User Manual

Page 14: After searching

CH+

CH-

VOL-

VOL+

CH+

CH-

VOL-

VOL+

Tuning

There are three ways of searching:automatic search,manual search and MFT
manual fine tune)
You may operate it either on the TV or on the remote control.Here is mainly
about the remote control

Automatic search

Press CH+/- button to

move to Auto Search item

Press VOL+,then Auto Search

will work

The TV set will search

automatically all available

programs, after that, all available

program will be stored in turn

and the TV set will return to the

first channel

Press MENU button and

VOL+/- to select Tuner menu

Then press CH+/- to enter

After searching

Press CH+/- button to check the channels.
If the color or sound is abnormal in a certain channel, it
may be the color or sound system has not been set properly,
so you should adjust it to the proper system (Reference to
page 9).

Freq. 308MHz

Auto Search

If you want to stop the search, just press MENU button
The order of the automatic search is due to the frequency of the
program, generally speaking, it is used only at the first time you
search the program, and once the order of the program has been
confirmed, you don't have to use this function, otherwise the
order of the program will be changed.

Prog. 0
Color Sys. PAL
Sound Sys. DK
Skip Off
Prog.Name -----
Search Set

Auto Search
Exchange

Picture Audio

Tuner

Func

Time