Maintenance precautions, Air cleaner, Engine oil – HONDA CT110 User Manual
Page 5
MAINTENANCE PRECAUTIONS
WARNING
•
If your motorcycle is overturned or involved in a collision, inspect
control levers, cable, accessories, and other vital parts for damage. Do
not ride the motorcycle if damage impairs sage operation. Have your
authorized Honda dealer inspect the major components, including
frame, suspension and steering parts, for misalignment and damage
that you may not be able to detect.
•
Stop the engine and support the motorcycle securely on a firm, level
surface before performing any maintenance.
•
Use new, genuine Honda parts or their equivalent for maintenance and
repair. Parts which are not of equivalent quality may impair the safety
of your motorcycle.
AIR CLEANER
( Refer
The air cleaner should be serviced at
riding in dusty areas, more frequent
service may be necessary.
1. Remove the wing nut (1) , washer and air cleaner tube clamp screw (2) , then remove the air
cleaner tube and air cleaner housing cover.
2. Unsecure the mounting plate bolt (3) and remove the mounting plate (4) .
3. Pull out the air cleaner (5) .
4. Wash the air cleaner in non-flammable or high flash point solvent and let it dry thoroughly.
WARNING
Never use petrol or low flash point solvents for cleaning the air cleaner.
A fire or explosion could result.
5. Soak the air cleaner in gear oil ( SAE 80 - 90 ) and squeeze out the excess.
6. Install the removed parts in the reverse order of disassembly.
ENGINE OIL
( Refer
Engine Oil
Good engine oil has many desirable qualities. Use only high detergent, quality motor oil certified on the
container to meet or exceed requirements for service SE or SF. It is not necessary to use additives.