Heartland Toledo XT - Manual (Page 10)

Using your Range
10
Igniting Cooktop Burners
without Electricity
If there is a power failure, the cooktop burners can be
lit with a match.
1. Hold a burning a match ½ inch from the burner
head keeping your hand as far horizontally away
from the burner as possible.
2. Push and turn burner control knob to HI/ lighting
position. As soon as the burner flame lights move
your hand away. With your other hand, keep
holding the knob pressed for a few seconds so
that the burner safety device can ‘sense’ the heat
of the flame.
3. Turn burner control knob to OFF position when
finished.
You can remove the burner cap and head for
cleaning, see page 22.
You should wipe the enamel top surface of the range
around the cooktop burners as soon as possible after
spills occur.
Note:
Use of aluminum pans may cause metallic marking
of the grates. This does not affect the durability of the
enamel and may be cleaned off with a metal polish.