Delay between blocks, Overall checksum, Delay between blocks -3 overall checksum -3 – Hand Held Products 4600g User Manual
Page 87
4600g, 4600r, 4800i User’s Guide
6 - 3
Delay Between Blocks
This sets the delay time between data blocks.
Default = 50ms.
Overall Checksum
When this option is turned on, a computed check character is added at the end
of the entire message. The check character is the character which when
Exclusive-OR’d with every preceding character of the message yields a result of
0x00 (00H).
Default = Off.
5ms
500ms
* 50ms
150ms
On
* Off