LG Signature Series TurboSteam Series 29 Inch Electric Smart Dryer Owners Manual - Manual (Page 38)

38
Your dryer features several additional cycle options to
customize cycles to meet your individual needs. Certain
option buttons also feature a special function (see the
following page for details) that can be activated by
pressing and holding that option button for 3 seconds.
To Add Cycle Options to a Cycle:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle modifier buttons to adjust the settings
for that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message is shown in
the display.
4. Press the Hold to Start button to start the cycle. The
dryer starts automatically.
SIGNAL
Adjusts the volume of the Signal or turns off the Signal.
Press the button repeatedly until the desired volume
setting is illuminated.
Cycle Modifier Buttons
SENSOR DRY cycles have preset settings that are
selected automatically. MANUAL DRY cycles have
default settings, but you may also customize the
settings using the cycle modifier buttons.
Press the button for that option to view and select other
settings.
DRY LEVEL
Selects the level of dryness for the cycle. Press the DRY
LEVEL button repeatedly to scroll through available
settings.
t5IJTPQUJPOJTPOMZBWBJMBCMFXJUI4&/403%3:DZDMFT
t5IFESZFSXJMMBVUPNBUJDBMMZBEKVTUUIFDZDMFUJNF
Selecting MORE or VERY increases the cycle time, while
LESS or DAMP decreases the cycle time.
t6TFB-&44PS%".1TFUUJOHGPSJUFNTUIBUZPVXJTIUP
iron.
TEMP.
Adjusts the temperature setting from ULTRA LOW
to HIGH. This allows precise care of your fabrics and
garments. Press the TEMP. button repeatedly to scroll
through available settings.
TIME DRY
Allows you to manually select the drying time, from 20
to 60 minutes, in 10-minute increments. Use this for
small loads or to remove wrinkles. Use the MORE TIME/
LESS TIME buttons to add or reduce the drying time in
1-minute increments.
NOTE
To protect your garments, not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
OPERATION