Electrolux L 56840 - Manual (Page 11)

After closing the door, it is necessary to select the programme and options again and to
press button 5 .
At the end of the programme
The machine stops automatically. The pilot light of button 5 and pilot light 7.1 go off. The
phase light 7.2 goes on.
If a programme or an option that ends with water still in the tub has been selected, the
relative pilot light remains lit, the phase light 7.2 goes on, the door remains locked to
indicate that the water must be emptied out before opening the door.
To empty the water out:
• turn the programme selector dial to
• select the DRAIN or SPIN programme
• reduce the spin speed if needed, by means of the relevant button
• press button 5
• when the programme has finished only the pilot light 7.2 comes on.
Turn the programme selector dial to to switch the machine off. Remove the laundry
from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the door open
to prevent the formation of mildew and unpleasant smells.
Stand by : once the programme has finished after a few minutes the energy saving system
will be enabled. By pressing any button the appliance will come out of the energy saving
status.
Washing programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Spin Speed
Maximum Fabrics Load
Type of Laundry
Options
Detergent Com-
partment
COTTONS
KATOEN -BLANC/COULEURS
95° - 30°
Main wash - Rinses - Long spin
Maximum speed at 1600 rpm
Max. load 6 kg - Red. load 3 kg
White and coloured cotton (normally soiled items).
SPIN REDUCTION
RINSE HOLD
STAIN 1)
SUPER QUICK 2)
EXTRA RINSE
11