LG UltraGear 47.5" 4K HDR 138 Hz Gaming Monitor - Manual (Page 16)

16
ENGLISH
NOTE
• The [Game Mode] can be set depends on the Input signal.
• If the [Game Mode] is changed in the DP (DisplayPort) input, the screen may flicker or the resolution of your
PC screen may be affected.
• HDR content may not display correctly depending on Windows 10 OS settings, please check HDR On/Off
settings in Windows.
• When the HDR function is turned on, the characters or picture quality may be poor according to Graphic card
performance.
• While the HDR function is on, screen flickering or cracking may occur when changing the monitor input or
power on/off according to Graphic card performance.
• For information about whether the graphics card and game support HDR, visit their manufacture's website.
[Game Adjust]
> [Game Adjust]
• [Overclock]
- [On]: Sets [Overclock] to a higher refresh rate than specified by the panel specification.
- [Off]: Disables the [Overclock] improvement feature.
• [Adaptive-Sync]/[VRR]: This function shows a clear screen without screen tearing or stuttering in the game
environment.
However, screen flickering may occur in some game environments.
• [Black Stabilizer]: You can control the black contrast to have better visibility in dark scenes. You can easily
distinguish objects on dark game screens.
• [Crosshair]: Crosshair provides a mark on the center of the screen for First Person Shooter (FPS) games.
Users can select the crosshair that fits their gaming environment among four different crosshairs.
• [FPS Counter]
- [On]: The indicator is displayed on the upper left of the screen. It will reflect the actual frame rate that is
received at the input. You can also adjust the position of [FPS Counter]. (upper left/upper right/lower right/
lower left)
- [Off]: Does not use the [FPS Counter] feature.
- [FPS Counter] and [Crosshair] feature can not be used at the same time.
• [UltraWide Switch]: Displays on an ultra-wide resolution screen.
• [Game Reset]: Returns game settings to the default settings.