beautypg.com

Philips AVENT SCF875/01 User Manual

Page 15

background image

13

ENGLISH

lock it in place on the main unit (Fig. t). Make sure the handle is on the

right-hand side.

»

When the jar is correctly locked in place on the main unit, the icon on
the jar will line up with the icon on the main unit.

7

Push and hold the blending button to start blending until the food is

properly blended (Fig. u).

Caution

• Do not let the appliance blend for more than 30 seconds at a time. If you

have not finished blending after 30 seconds, release the button to stop

blending and wait a few seconds before you continue. If the main unit

becomes hot, let it cool down for a few minutes before you continue.

8

When you have finished blending, release the blending button (Fig. v).

9

Unplug the appliance.

10

Remove the blended food from the jar. If necessary, use the spatula included

with this appliance.

Reheating

A 120 ml storage pot is included with the appliance. Use the storage pot to reheat
the baby food you have made with the appliance.

Note

• A pack (SCF876) containing 2 storage pots with capacity of 120 ml and 240 ml

can be purchased separately in some markets.

• Always put previously blended food in the storage pot to reheat.

• Make sure that the sealing ring is assembled around the jar lid before

reheating, and that the flat side of the sealing ring is facing out.

1

Pour the appropriate amount of water into the water tank.

»

If you are using the 120 ml storage pot, pour 160 ml of water into the water
tank (i.e. to the water level marking for 10/15 min.) ; if you are using the
240 ml storage pot (purchased separately), pour water to the MAX water
level marking indicated on the side of the water tank or the MAX water
level indication in the water tank.

2

Put the water tank lid on the water tank and turn the lid clockwise to lock it

securely in place (Fig. f).

»

When the water tank lid is locked correctly in place, the icon on the
water tank lid will line up with the icon on the water tank.

3

Take the blade unit out of the jar (Fig. w).

4

Flip the storage pot over and place it onto the blade unit holder in the jar

(Fig. x).

5

Place the jar lid on the jar and turn it clockwise to close it securely (fig. y).