2 – 4 in “connecting to listed, Access points, To connect to – Canon IXUS 180 User Manual
Page 80
80
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Wi-Fi Functions
Accessories
Appendix
Index
•
Once you have connected to devices via the Wi-Fi menu, recent destinations
will be listed first when you access the Wi-Fi menu. You can easily connect
again by pressing the [ ][ ] buttons to choose the device and then pressing
the [ ] button. To add a new device, display the device selection screen by
pressing the [ ][ ] buttons, and then configure the setting.
•
If you prefer not to display recent target devices, choose MENU (
) ►
[ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Target History] ► [Off].
•
You can also change the camera nickname on the screen in step 2 (
).
•
When the camera is connected to a computer, the camera screen is blank.
•
Mac OS: If CameraWindow is not displayed, click the [CameraWindow] icon
in the Dock.
•
To disconnect from the camera, turn off the camera.
•
If you chose [PIN Method] in step 6, a PIN code will be displayed on the
screen. Be sure to set this code in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user manual included
with your access point.
Connecting to Listed Access Points
1
View the listed access points.
z
z
View the listed networks (access points)
as described in steps 1 – 4 of “Using
2
Choose an access point.
z
z
Press the [ ][ ] buttons to choose a
network (access point), and then press
the [ ] button.
z
z
Double-click the connected camera icon.
z
z
Driver installation will begin.
z
z
After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
10
Display CameraWindow.
z
z
Windows: Access CameraWindow by
clicking [Downloads Images From Canon
Camera].
z
z
Mac OS: CameraWindow is automatically
displayed when a Wi-Fi connection is
established between the camera and
computer.
11
Import images.
z
z
Click [Import Images from Camera], and
then click [Import Untransferred Images].
z
z
Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
z
z
Click [OK] in the screen that is displayed
after image import is complete.
z
z
To view images you save to a computer,
use preinstalled or commonly available
software compatible with images
captured by the camera.