Service mode – PLANET CV3-M1024 User Manual
Page 61

If you are using a PC that is not dedicated to run this program only (working
with some other programs at the same time). You can turn on the service
mode, which can be accessed from the side menu bar under the “
SYSTEM”
menu, select “
Service Mode”.
This will minimize the program to the Windows system tray.
The function to detect new NVR and event trigger notification will continually
to work in the back- ground.
You will get notification from the tray if the program has detected a new
NVR has been placed on the network.
A small video will also be pop ping out from the tr ay to notify y ou that an
abnormal motion has been detected.