DE DIETRICH DLZ614JE1 - Manual (Page 88)

washing machine
safety and troubleshooting
88
Important
If you detect any problems with
your washing machine, you will
probably be able to rectify them
yourself by consulting the following
instructions.
If this is not the case, unplug the
appliance and contact the
TECHNICAL ASSISTANCE
SERVICE.
PROBLEMS
Do not open up the
washing machine. It does
not contain any fuses or
similar components that
can be replaced by the
user.
Why won’t the washing
machine start?
Why is the washing machine
vibrating or making too
much noise?
This may be due to the following:
Check the door is properly shut.
The washing machine is not plugged into the mains or
there is no voltage in the mains supply.
The Start/Stop button has not been pressed.
If the washing machine door is not properly shut, F04
will appear on the display.
This may be due to the following:
The blocking and transport screws have not been
removed.
The washing machine has not been correctly levelled.
On spin-drying, the motor makes a kind of whistling
noise. This is due to the mechanical action of the motor
itself and is perfectly normal.
Indicaor
FO1
FO2
CO3
FO4
FO5
.
.
.
.
.
F10
Problems
No water coming in
Does not drain or spin-dry
Does not spin-dry
Does not start
Call the Technical Assistance Service