Fluidyne Control Systems 6635 Series P. D. Flowmeter - Manual

Fluidyne Control Systems (P) Ltd.
S. No. 79/2,Plot No.12, Near Agarwal Godown, Shivne,
Pune-411 023. India
Tel.: 020-25290504, 25290870 Fax: 020-25292773
E-mail: [email protected]
Series 6635 : P. D. Flowmeter
For very high accuracy measurements of Diesel / Petrol /
Kerosene / Solvents With Large Numerical Mechanical Counter
www.fluidyne.co.in
Specifications
Features
Introduction
The Series 6635 flowmeter is a very high precision high
accuracy flowmeter specially designed for metering
expensive fuels and solvents. Due to a consistent accuracy
of ±0.1% of reading this meter can be used for custody transfer
applications. It is an ideal solution for unloading fuels such as
diesel, petrol, kerosene and all types of solvents.
·
·
·
·
·
·
·
·
High Accuracy ±0.1% of reading.
High repeatability ±0.02% of reading.
Stepless calibration adjustment.
Wear compensating vane design.
Large numeral counter for easy readability.
Very low pressure prop.
Fully mechanical system safe for hazardous area use.
Pulse output for remote monitoring optional.
Type Positive displacement Rotary Vane.
Size 40NB.
Flow Range 35-350 LPM
Counter Veeder Root 7887 Large Numeral
Accuracy ±0.1% of reading
Repeatability Better than ±0.02%.
Rangeability 10% - 100% of max. flow range.
Max. Working Pressure 10 kg/cm2.
Operating Temp. Range 30 C-70 C.
Filter Element 150 micron SS reusable.
Air Eliminator Float activated pilot operated.
Material of construction Meter body - Cast Iron
Strainer A/E - Carbon steel
Vanes - Morganite Carbon CY10C
Seals - Nitrile
Rotor - Aluminium
Float - SS 316
Dimensions
o o
Flow Rate Vs Accuracy
Test Liquid : Diesel
-0.100
-0.075
-0.050
-0.025
0
+0.100
+0.075
+0.050
+0.025
140 315 280 350 245 210 70 105 175 35
FLOW RATE LIT/MIN
%
ACCURACY
Flow Rate Vs Accuracy
Test Liquid : Diesel
50 100 200 250 300 350 150
0
0.5
1.0
1.5
2.0
2.5
0
0.035
0.070
0.105
0.140
0.175
FLOW RATE LIT/MIN
PRESSURE DROP
PSI
KG/CM
2
DO NOT RESET WHILE COUNTING
0 0 0 0 0 0 0 0
L I T E R S
0 0 0 0 0
4 Holes Ø M12
Tapping
Flange
11/2" ANSI 150
:
:
:
:
:
:
:
:
:
:
:
: