Rose Electronics Xtensys - Manual (Page 11)

Installation and Operations Manual 5
Switching to a computer – XTR-11 model
There are two methods of switching a user station to a computer connected
to an Xtensys switch. You can use the OSD list of connected computers or
simple keyboard commands. To display the OSD list of computers using
the KVM station connected to the XTR-11 model, press and release the left
Ctrl key then the Esc key. The window shown in figure 2 will display.
Note: The computer select window is different for the XTR-14 model.
Figure 2. XTR-11 Computer select window
The computer select window is a dynamic window that will automatically
adjust to the number of computer ports that are on the Xtensys switch that
the user station is connected to. The left column lists the computer port
number on the Xtensys switch. The middle column is the connected
computer’s name and the right column displays a green indicator if that
computer is connected and powered on or a red indicator if there is no
computer or the computer is not powered on. Use the page up and down
keys to scroll to more computers. Select the computer to switch to and press
enter and that computer will be connected to the user station and have full
keyboard and mouse control if authorized.