Epson EXPRESSION 1640XL - Manual (Page 9)

Using Optional Equipment 41
Loading 4
×
5-inch film
Follow these steps to load 4 × 5-inch
film:
1. Place the 4 × 5-inch film guide on a
flat surface and remove the cover
from one of the film holders.
2. Insert the film in the film holder,
making sure the glossy (smooth)
side of the film faces down and the
film emulsion layer faces up. Then
close the cover.
3. Repeat steps 1 and 2 for all the film
you scan.
4. Place the 4 × 5-inch film guide
on the document table. Align it
with the notch on the
transparency guide as shown.
5. Close the TPU and begin your
scan.
If you’re using EPSON Scan, set the following options:
■ If you’re using Home Mode, select one of the following for the
Document Type option: Positive Film, Color Negative Film, or B&W
Negative Film.
■ If you’re using Professional Mode, set the Document Type option to
Transparency, and then set the Film Type option to Positive Film,
Color Negative Film, or B&W Negative Film.
1640XL.book Page 41 Wednesday, November 19, 2003 8:46 PM