Precision Digital PD6770 - Manual (Page 8)

PD6770 Loop-Powered Process Meter Instruction Manual
8
INSTALLATION
All controls and wiring connectors are accessed by opening the enclosure. To access
electrical connectors, remove the 2 captive screws and remove the display module
from the enclosure.
WARNING
Hazardous voltages may exist within enclosure.
Installation and service should be performed only by trained
service personnel.
Unpacking
Remove the meter and conduit plug from box. Inspect the packaging and contents for
damage. Report damages, if any, to the carrier. If any part is missing or the meter
malfunctions, please contact your supplier or the factory for assistance.
Conduit/Stopping Plug
The PD6770 includes three ¾" NPT threaded conduit openings and one IP68 rated
¾" NPT plastic conduit plug.
The conduit/stopping plug included has 1.29" wrenching flats and a screwdriver slot.
Mounting
The PD6770 has two slotted mounting flanges that may be used for pipe mounting or
wall mounting. Alternatively, the unit may be supported by the conduit using the
conduit holes provided.
Refer to Mounting Dimensions, page 15 for details.
WARNING
Do not attempt to loosen or remove flange bolts while the meter is
in service.