Playing cassette tapes – Emerson Radio PD6922 User Manual

Page 16

1 5

PLAYING CASSETTE TAPES

1.) Open the cassette door by pressing the

key..

2.) Place a pre-recorded cassette tape into the slots on the inside of the door with

the exposed tape facing up and the full reel on the right side.

3.) Move the FUNCTION selector to the OFF/TAPE position.

4.) Press the cassette

key to begin playback.

5.) Adjust the VOLUME + / – controls as desired.

6.) To advance the tape rapidly press the

key. To stop the tape before it ends

press the

key..

7.) To rewind the tape rapidly press the

key. To stop the tape before it ends

press the

key..

8.) When the tape ends the Automatic Stop System releases the

key and shuts

off the tape motor. You may then open the cassette door, remove your tape,

turn it over and play the other side if desired.

9.) When you are finished listening press the

key to stop the tape. Open the

door, remove the tape and close the door. If you are playing a tape and then

switch to the RADIO or CD function be sure to disengage the tape mechanism.

This prevents excess wear and tear on the mechanism.

IMPORTANT:

Always press the

key to shut off the tape motor before opening the cassette

door to remove your tape. The Automatic Stop System does not function in the

Fast Forward and Rewind modes. When the tape ends in the

and

modes

the motor continues to run. You must press the

key to shut off the motor

before opening the door to remove your tape.

PD6922_B111003.p65

10/11/2003, 11:12