Livarno 103792-14-01-BS/103792-14-02-BS - Manual (Page 5)

5 GB
Introduction
LED Clip Light
Q Introduction
The instructions for use are
to be considered as part of
the product. They contain
important information concerning safety,
use and disposal. Before using the product,
please familiarise yourself with all of
the safety information and instructions
for use. The product must only be used
as described and for the stated fields of
application. If you pass the product on
to third parties, please give them all of
the documentation as well.
Q Intended Use
This lamp is intended for use indoors only,
in dry and enclosed rooms. Other forms
of use or changes to the product are
deemed to be contrary to the intended
use and may result in risks such as the
danger of death, injuries and damage.
The manufacturer does not accept any
liability for injury or damage resulting
from use of this product contrary to its
intended use. The product is not intend-
ed to be used for commercial purposes.
Q
Description of parts
1 Flexible lamp arm
2 Clamp
3 ON / OFF switch
4 Mains connection lead
5 Mains connector
6 Mains adapter
Q Technical data
Lamp:
Operating voltage: 12 V ,
160 mA (approx.)
Operating
voltage per LED: 0.3 W (approx.)
Protection class:
III /
TÜV / GS tested
The bulb cannot be replaced.
Mains adapter:
Rated voltage,
primary:
100–240 V~
0.5 A, 50–60 Hz
Rated voltage,
secondary:
12 V , 0.25 A
Protection class: II /
Model No.: LPS03-120-
0250-2W
DEKRA / GS tested
103792_A-B_LED-Klemmleuchte_Content_SI_CZ_SK.indd 5 09.10.14 10:50