Model ir20.v2, Fig.1, Introduction & specifications 3. assembly – Sealey IR20 User Manual
Page 2

Model
IR20.v2
Heat output
20.5kW
rating
70,000Btu/hr
fuel
Paraffin / Kerosene / Diesel
running time Per filling
7hrs (max)
fuel tank capacity
15litres
Heated Area
14000ft³ / 396m³
Voltage/Hz
230V / 50Hz
rated Amps
5A
net Weight
14Kg
Infrared heater suitable for well ventilated indoor applications. clean burning unit operates on paraffin, kerosene or diesel.
unit produces an impressive 70,000Btu/hr. 15ltr fuel tank allows a max of 7hrs running time, making this unit extremely economical. complies
with rigorous standards and is fitted with a safety cut-out.
DO NOT switch the heater off by disconnecting it from the mains. ALWAYS set the switch on the burner to the ‘off’ position and allow
the cooling cycle to finish, before disconnecting from the mains.
DO NOT use an external fuel tank. only use the tank that is fitted to the heater, and only fill it when the heater has cooled down.
ensure that the heater is correctly turned off
When not in use for an extended period, store in a safe, dry area, out of reach of children.
NOTE: this appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack
of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person
responsible for their safety.
children should be supervised to ensure that they do not play with the appliance.
2. INTRODUCTION & SPECIFICATIONS
3. ASSEMBLY
unpack the heater and check contents. should there be any damaged or
missing parts contact your sealey dealer immediately.
3.1. Attach handle by lining up the holes in the handle with the holes in the
upper shell of the heater (fig.1).
3.2. Insert screws and tighten.
3.3. remove heater and packaging material from the carton.
Note! Retain the box and packaging material for future storage.
Fig.1
Original Language Version
Ir20.V2 Issue: 5 - 19/04/12
WARNING! This heater is not suitable for use with Bio-Diesel; use
of Bio-Diesel will damage the filter and seals.
Damage caused by use of Bio-Diesel will not be covered
by warranty.